DESIGNING, FABRICATING AND INSTALLING ARCHITECTURAL SIGNS SINCE 1956.
Sign Survey
Measuring, photographing and "mapping" the site premises and property lines then contacting the local building department to find out the type of sign permitted at your location.
design
Using our technical sign knowledge and experience to take your vision from an idea to actual design with shop drawings for your review and approval.
sign permits
Researching signage regulations and applying for your sign permits at your local building department so you don't have to.
fabrication
Encompassing 62 years of experience, knowledge and quality sign manufacturing to light up your business signage.
installation
As a C-45 sign contractor we install interior ADA and lobby signs, interior and exterior sign internally illuminated signage.
SIGNAGE PRODUCTS & SERVICES
-
CHANNEL LETTERS
-
LOBBY SIGNS
-
PROTOTYPES
-
WOOD SIGNS
-
CAST PLAQUES
-
CAST LETTERS
-
VINYL LETTERS
-
WAYFINDING SIGNS
-
ADA SIGNS
-
MONUMENT SIGNS
-
DIGITAL SIGNAGE
-
ELECTRIC SIGNS
-
GRAPHIC DESIGN
-
SIGN PERMITS
-
SIGN MAINTENANCE
-
SIGN ENGINEERING
-
ILLUMINATED SIGNS
-
LED MESSAGE DISPLAYS
-
BUILDING DIRECTORIES
-
DIRECTIONAL SIGNAGE
-
KIOSKS
-
POST AND PANEL SIGNAGE
-
SIGN SYSTEMS
-
DIMENSIONAL LETTERS
LOBBY SIGNS
We design, fabricate, ship and install more lobby signs than any other sign company in the Bay Area
MONUMENT SIGNS
WE DESIGN, BUILD AND INSTALL INTERIOR EXTERIOR SIGNS FOR WEWORKS
INTERNALLY ILLUMINATED REAR LIT LETTERS
FABRICATE AND INSTALL INTERNALLY ILLUMINATED BLADE SIGN, ELEVATOR VINYL GRAPHICS ON EACH FLOOR, LOBBY SIGNS, AND ADA INTERIOR SIGNAGE.
WE DESIGN BUILD REFACE FIX UPDATE EXISTING MONUMENTS SIGNS
MONUMENT AND WAYFINDING SIGNS AT EXPLORATORIUM MUSEUM IN SAN FRANCISCO
SCOPE OF WORK: FABRICATE AND DELIVER 6 DOUBLE-SIDED INTERNALLY ILLUMINATED FREESTANDING SIGNS
AGS fabricated and delivered six freestanding signs for the Exploratorium in San Francisco. Each sign are double-sided that feature LED lighting on edge-to-edge acrylic panels. Each sign is fabricated from aluminum and powder coated for durability. 1” thick steel plates were used as bases and also powder coated. The largest freestanding sign has a 65” Samsung monitor mounted inside of the sign. Brochure holders were fabricated below the monitor that can be opened or be closed. Standard 110 volt plugs were installed in each sign for customer convenience.
ARCHITECTURAL GRAPHIC SYSTEMS
SAN FRANCISCO SIGN COMPANY
We are not just a sign shop. We are a licensed sign contractor with a C-45 license. We have a graphic design studio and do custom sign manufacturing. As the best visual communication experts in San Francisco we provide quality sign products with the emphasis on exceptional customer service. Our business is built on satisfied customers. Call us today to speak to a sign expert
SCOPE OF WORK: LOBBY SIGN AND INTERNALLY ILLUMINATED EXTERIOR SIGN FACE LIT LETTERS WITH HALO DIAMOND AND STARS
We worked with Signature Inn’s team from Denver, CO for six months and had created lobby signage that met their criteria. The design elements of the “Signature” sign consisted of installing it on top of one diamond in the middle and two stars, one on each end. The interior lobby sign was made of ¼” and ½” thick aluminum. For a dimensional look, the diamond and stars were mounted with ¼” spacers and the “Signature” sign was mounted with ¾” spacers. The exterior sign was designed in the same manner as the lobby sign but an illuminating element was added. The diamond and stars were rear lit internally, illuminated with a 1/8” thick white reflective surface. The “Signature” sign was internally illuminated face lit letters.
NEON LETTERS AND LIGHTING
SCOPE OF WORK: AWNINGS, BLADE SIGN, VINYL GRAPHICS, TRIMLESS LETTERS AND LOGO
We designed, fabricated and installed new signage such as vinyl graphics and awnings for TableTop in San Francisco, CA. The double-sided blade sign is internally illuminated with push through acrylic letters and logo. Mounted above the main entrances are custom aluminum awnings with down lights. The main signs are internally illuminated with RGB lighting. The trimless, push-through letters and logo signage are internally illuminated and mounted to a custom designed raceway. The 285 linear feet of brick-designed, vinyl graphics were installed on the building fascia.
INTERNALLY ILLUMINATED REAR LIT STAINLESS STEEL LETTERS AND LOGO
SCOPE OF WORK: BRUSHED STAINLESS STEEL LETTERS, EMBEDDED INTERNALLY ILLUMINATED LOGO, CUSTOM HANGING SIGN WITH INTERNALLY ILLUMINATED LETTERS
The brushed stainless steel letters and logo are 0.25” thick and were mounted on the ceramic tile with studs. The main signage is internally illuminated 1.5” thick embedded letters and logo which were mounted onto a steel beam. The logo was mounted to the ceiling with hidden mounting fasteners and custom stainless steel bracket above the entrance. The 1” deep illuminated letters were mounted on the internally illuminated embedded interior hanging sign with studs. The on-and-off switch is behind the hanging frame where the ballast and wiring harness are hidden.
EMBEDDED LED FACE LIT LETTERS
SCOPE OF WORK: INTERNALLY ILLUMINATED SIGN AT ENTRANCE, BRUSHED LOGO NEAR RECEPTION DESK, NEON LOGO MOUNTED TO BAR SHELVING, VINYL LOGOS ON WINDOWS
Above the main entrance doors is a 7’ x 4' internally illuminated sign. The vinyl sign face was applied on the first surface exterior which is above the main entrance doors. The sign cabinet is internally illuminated and was mounted behind the vinyl sign face from the interior of the restaurant. The 0.5” thick brushed brass logo with sandblasted edges were mounted on sheetrock wall with studs and silicone. The 36” high x 5” deep neon letters were mounted to the shelving above the bar. Vinyl logos were mounted to the second surface of the restaurant windows.
EXCLUSIVE SIGN COMPANY FOR SONOMA RACEWAY
INTERNALLY ILLUMINATED LOBBY SIGN AT RECEPTION DESK, ACRYLIC LETTERS AND LOGO MOUNTED TO WALL
The logo that is mounted to the reception desk at the main entrance is a custom fabricated 24” internally illuminated halo lobby sign. Due to the element of the wood slats, the logo was designed with a white circular backing to reflect a halo effect. Additional signage was installed in the lunch area. It is ½” thick laser cut, painted acrylic letters and logos that were painted to the customer’s PMS colors. The signage was mounted with ¾” spacers and studs.
INTERNALLY ILLUMINATED REAR LIT LETTERS WITH WHITE BACKING PLATES
ALUMINUM LOBBY SIGN AND INTERNALLY ILLUMINATED EXTERIOR SIGN
At WIPRO in Mountain View, CA, we had fabricated and installed their lobby signs and internally illuminated exterior signage. The 12” high x 1” thick, aluminum lobby sign was mounted with 1” spacers and studs. The 60” x 72” aluminum, internally illuminated LED exterior building sign was fabricated with a push through acrylic logo. The sign cabinet was mounted close to the roofline on the third floor and the WIPRO logo consisted of over 80 different colors.
BRUSHED STAINLESS STEEL LETTERS MOUNTED TO MONUMENT SIGN, CLEAR ACRYLIC WITH SECOND SURFACE VINYL GRAPHICS
Suning had an existing lobby and monument signs that needed to be updated.. The internally illuminated lobby sign was updated their new logo. The brushed, stainless steel letters on the fabricated, double-sided monument sign are 10” high x 1” deep and mounted on each side.
ABOUT OUR SIGN COMPANY
AGS specializes in designing, manufacturing and installation of architectural signage. We have supplied clients across the country with quality signs and service since 1956. Whether you require a sign for a new construction or updating your existing signs, AGS can manage your entire sign project from graphic design to installation. Our sign company can offer a complete array of business lobby and ADA signs, interior and exterior retail business signs and custom monument signs. We will ensure that you obtain the most cost-effective solution to promote your brand, image and message.